(731) 352-0104  

Did you know that Remanufacturing is Recycling?  Have you considered how your decision to make a major repair to your vehicle affects our environment? We have researched how much energy JASPER utilizes in the remanufacturing process and compared it with information from the Argonne National Lab, a research center for the U.S. Department of Energy.

By averaging the curb weight of three vehicles: a Mercedes-Benz W126, a Hummer H2, and a Toyota Prius, a determination was made on the average amount of energy required in manufacturing vehicles. Energy usage at JASPER, per drivetrain component, was figured and, on average, only 1% of the energy is consumed in remanufacturing a drivetrain component in comparison to manufacturing the entire vehicle.  That is an energy savings of nearly six tons of coal or 1008 gallons of crude oil. Rather than replacing their vehicles, our customers, by purchasing JASPER remanufactured engines, transmissions, and differentials saved enough energy in 2007 to power an estimated 598,000 households, or every residence in a city the size of Washington, D.C., for an entire year!

JASPER 3 YEAR/100,000 MILE WARRANTY

JASPER can offer this beefy warranty on our remanufactured automatic and standard transmissions because every one of them goes through our extensive "Do It Right" process that ensures worry-free operation.  Our shop chooses JASPER because our customers deserve not only the best product and service we can provide but also the peace of mind that comes with high quality - dependable products like JASPER transmissions, engines, and differentials.  

D & D Services Center & Towing in Mckenzie now provides the GM 6T40 and 45E FWD and AWD Transmission Replacement Options from JASPER Engines & Transmissions.  These transmissions are available for the following 2008-2011 applications:  Chevrolet Equinox and Malibu  |  GMC Terrain  |  Pontiac G6  |  Saturn Aura  |  Buick Regal and LaCrosse

D & D Services Center & Towing in Mckenzie now provides the Jasper Engines re-manufactured Toyota A750E (RWD) and A750F (4WD) transmissions. These transmissions are available for the 2004-2011 Toyota Tundra, Sequoia, Tacoma, 4 Runner, and FJ Cruiser transmission replacements

Each JASPER remanufactured Toyota A750E and A750F transmission is 100% dynamometer tested using a state of the art dyno software package eliminating the chance of shifting concerns and ensures a quality product for the customer.  All wear areas of the valve body are reamed to oversize, where applicable, and vacuum-tested to restore the hydraulic integrity of the unit reducing the chance of low fluid pressure within the transmission, causing slipped clutches.

In addition to the value-added quality re-manufacturing steps to provide a perfect product, great care is taken to ensure each A750E and A750F transmission replacement option can stand up to the rigors of everyday life.  Each transmission receives 100% new friction plates from the OE manufacturer to retain shift quality and durability. Converter linings are 100% replaced to reduce lock-up shudder and solenoids are 100% tested to verify proper operation before they are installed in the transmission.

The JASPER remanufactured Toyota A750E and A750F transmission is covered by a three-year, 100,000 mile, nationwide parts, and labor warranty.  Talk to our team at D & D Services Center & Towing in Mckenzie about your specific needs and any transmission replacement questions you might have for your Toyota, we'd be happy to answer them for you and see if a JASPER remanufactured transmission is right for you.

D & D Services Center & Towing in Mckenzie is pleased to offer the remanufactured Holset HE351VE turbocharger to our customers for 2007 and current Cummins 6.7L diesel engine applications.  Each JASPER remanufactured Cummins 6.7L Holset turbo undergoes a three-step balancing process.   The turbine shaft/wheel assembly, and the compressor wheel, are individually balanced on a component balancer.  The rotating assembly, or center section, is then balanced on a high-speed VSR machine.  The center section is balanced at over 70,000 RPM.  They verify balance is at .05 grams per square inch or below for best operation and improved turbo life.

D & D Services Center & Towing in Mckenzie  is proud to announce the availability of the transmission replacement option through Jasper Engines & Transmissions for re-manufactured Ford 6F50 and 6F55 transmissions.

D & D Services Center & Towing in Mckenzie is pleased to announce their newest product lines available for diesel engines:   Re-manufactured International MaxxForce DT Complete Diesel Engine.

D & D Services Center & Towing in Mckenzie now offers the JASPER Re-manufactured Nissan VQ40DE 4.0L DOHC Engine!   Jasper Engines & Transmissions, the nation’s leader in remanufactured products, announces the availability of its re-manufactured Nissan VQ40DE 4.0L engine.  This DOHC V6 engine is available in exchange for the following 2006-2011 vehicles:   Nissan Frontier, Pathfinder, X-terra offering several advantages:

  • Jasper Pref
  • 247towing
  • Acdelco
  • ASE
  • BBB
  • BF Goodrich
  • Cooper Tires
  • Cummins Diesel
  • Customer Savings
  • Duramax Diesel
  • Fleet Services
  • Ford Power Stroke Diesel
  • Michelin
  • Motorcraft Parts
  • NAPA AutoCare Center
  • Shuttle Service
  • Tires
  • Wifi Available

D & D Services Center & Towing

25675 Hwy. 22
Mckenzie, TN 38201
Get Directions

location small (731) 352-0104
Email the Shop

SHOP HOURS

Weekdays:   7:30 AM - 5:30 PM
Weekends: CLOSED

Make An Appointment

© Program, Brand & Specialty Pages, News Blog Content, Page Layout, and CMR EasyNews Programming by CMR, Inc a JSP Website or Top Auto Website

24-Hr Drop Form   |   ADA Accessibility   |   Job Application   |   Privacy Policy   |   Sitemap

ADD ARTICLE   |   LIS